รหัสสินค้า : RCM-28

พาวเวอร์แอมป์ RCM-28 ยี่ห้อ Electro Voice

RCM-28

OMNEO Network and DSP Module for Tour Grade Amplifiers

Description

The RCM-28 Remote Control Module is a two-channel digital controller module for live sound reinforcement, PA and fixed installation applications. The module can be used in Electro-Voice Tour Grade amplifier models. Installing the RCM-28 turns a conventional amp into a remote amplifier, which, at any time, provides complete overview of the overall system status and control of all system parameters. RCM-28 modules allow the integration of amplifiers into an OMNEO network with up to 100 devices in a single subnet without additional hardware. OMNEO is a media networking architecture for professional applications. Using standard IP Ethernets, media products that integrate OMNEO can be assembled into networks of 2 to 10,000 cooperating devices that exchange studio-quality synchronized multichannel audio and share common control systems. This offers the possibility to control and monitor an entire sound system from one or more PCs using the IRIS-Net - Intelligent Remote & Integrated Supervision - software package. In addition to digital signal processing functions, the RCM-28 also offers a digital audio input (AES/EBU), OMNEO network audio inputs and outputs, and freely programmable control inputs and control outputs.

Features

• OMNEO Network Interface
• Extend Tour Grade performance with powerful DSP functionality
• Advanced FIR-Drive loudspeaker optimization
• High precision load impedance supervision
• Two GPI and two GPO ports
• One-button system test for fast, complete check of connected cables and components
• Pilot tone detection for cable supervision
• Six recallable DSP/configuration presets
• Compatibility with any Dante network

Specification

A/D Conversion24 Bit linear, sigma-delta, 128x oversamplingAnalog Inputs2 audio inputs on internal slot connector, pre-/post fader selectableCAN Bus InterfaceNoneControl ProtocolOMNEOD/A Conversion24 Bit linear, sigma-delta, 128x oversamplingData Format24 Bit linear A/D and D/A conversion, 48 Bit processingDigital InputsOmneo Network and AES3 (AES/EBU) format, XLR in/ thru connectorsFIR-DriveYesGPIO Control Ports1 x 6-pole Euro block 2 control inputs (Uin max. 5 V) 2 control outputs (2x 100 mA) 2 reference outputs (+5 V, 200 mA; GND)Internal ProcessingDual core DSP, 500 MIPSNetwork Control (IRIS-Net)YesSample Rate48 kHzSample Rate Conversion (SRC)32–192 kHz, internal sample rate- converterSignal-to-Noise Ratio (A-weighted)weighted) ADC: 120 dB typical DAC: 120 dB typical AES3: 128 dB typical Analog In to Analog Out: 116 dB typical dBTHD+N< 0.002 %Height2RU 80.4 mm (3.17")Width84.7 mm (3.33")Depth230.8 mm (9.09")Weight Net14.11 oz (400 g)